new button front

General HydroFLASH discussion. Any issues that don't fit into the other topics belong here.

new button front

Postby Kajioka » Wed Sep 17, 2014 5:43 pm

I just received to new button fronts with with 4 pin connector. but when plug into the plug on the controller above the screen it sticks to far out to screw front panel back on. what do I do?

thanks
keith
Kajioka
 
Posts: 8
Joined: Mon Mar 17, 2014 8:56 am
HydroFLASH Type: ----
Mobile App Type: ----
Insteon Devices: ----

Re: new button front

Postby Support » Wed Sep 17, 2014 8:15 pm

It plugs into the connector below the Ethernet module at the bottom. Not at the connector at the top which is a 5 pin. You could damage thr ribbon cable if you use that one and attempt to force the cover on.

Plug into matching 4 pin connector. Cable will go over top of module laying flat and easy to place cover on.

See the photo of the proper connector placement here.
http://forum.hydroflash.net/viewtopic.php?f=3&t=260
Brooks
HydroFLASH Support
Support
 
Posts: 319
Joined: Sat Mar 02, 2013 4:46 pm
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: Both
Insteon Devices: Yes

Re: new button front

Postby dancalvin12 » Tue Oct 27, 2015 5:11 am

i want to see some images of that button, would you please upload some for me. I would really appreciate if you do this.
dancalvin12
 
Posts: 3
Joined: Tue Aug 25, 2015 9:35 am
HydroFLASH Type: Don't Currently Have a HydroFLASH
Mobile App Type: Android
Insteon Devices: No


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest

cron