Where to locate open/close sensor on garage car door?

Discussions related to Insteon Devices, Scheduling, etc.

Where to locate open/close sensor on garage car door?

Postby Elucidate » Sat Sep 06, 2014 10:25 pm

I have a window/door open/close sensor I would like to use on a garage door. I'm not looking to control the door. I want to use the sensor to create an event. The problem is where to mount the magnet. I tried it on the side but when opening closing the door the magnet gets clipped on the rails. I can't mount at top of door because it will get clipped by the leading edge of the bottom panel. Aside from mounting the magnet on some 6in piece of wood and wrapping around the rails some funky mount for the sensor, I'm at a loss where to mount the hardware. Any ideas?
Elucidate
 
Posts: 16
Joined: Wed Jun 18, 2014 2:34 am
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: iPhone
Insteon Devices: Yes

Re: Where to locate open/close sensor on garage car door?

Postby Support » Sat Sep 06, 2014 10:46 pm

You can place the sensor an magnet like this.

Hope this helps.

20140906_153946.jpg
Garage Door Open Close Sensor Mounting
20140906_153946.jpg (53.77 KiB) Viewed 7691 times
Brooks
HydroFLASH Support
Support
 
Posts: 322
Joined: Sat Mar 02, 2013 4:46 pm
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: Both
Insteon Devices: Yes

Re: Where to locate open/close sensor on garage car door?

Postby Elucidate » Sun Sep 07, 2014 5:10 am

Possibly. If that is the track where the chain/belt drive is our bars are horizontal not vertical like yours. But that does give me an idea. Thanks Brooks!
Elucidate
 
Posts: 16
Joined: Wed Jun 18, 2014 2:34 am
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: iPhone
Insteon Devices: Yes


Return to Insteon Controls

Who is online

Users browsing this forum: No registered users and 1 guest

cron