Firmware 3.0.4 stops responding over ethernet after 24-48hrs

Having problems? Perhaps others have had similar issues. Post HydroFLASH technical issues here.

Re: Firmware 3.0.4 stops responding over ethernet after 24-4

Postby Support » Tue Aug 26, 2014 12:45 pm

We are looking into this.

Thanks for the good feedback guys.
Brooks
HydroFLASH Support
Support
 
Posts: 319
Joined: Sat Mar 02, 2013 4:46 pm
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: Both
Insteon Devices: Yes

Re: Firmware 3.0.4 stops responding over ethernet after 24-4

Postby Support » Fri Aug 29, 2014 4:21 pm

We are still looking into this however would like to know if you had changed your firewall settings to make this occur or did it strictly show up after migrating to version 3.X?

I assume that you have temporarily modified the firewall settings to achieve your desired result but not cause the leak issue? (Like DennisD).
Brooks
HydroFLASH Support
Support
 
Posts: 319
Joined: Sat Mar 02, 2013 4:46 pm
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: Both
Insteon Devices: Yes

Re: Firmware 3.0.4 stops responding over ethernet after 24-4

Postby dave4444 » Sat Aug 30, 2014 12:40 pm

problem did not exist in 2.x, only started with 3.x
dave4444
 
Posts: 13
Joined: Thu May 01, 2014 8:59 pm
HydroFLASH Type: HydroFLASH Wired Version
Mobile App Type: iPhone
Insteon Devices: No

Re: Firmware 3.0.4 stops responding over ethernet after 24-4

Postby Support » Sat Aug 30, 2014 5:05 pm

We have reproduced the issue here and are looking at the root cause. Will advise of results.

Thanks,
Brooks
HydroFLASH Support
Support
 
Posts: 319
Joined: Sat Mar 02, 2013 4:46 pm
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: Both
Insteon Devices: Yes

Re: Firmware 3.0.4 stops responding over ethernet after 24-4

Postby Support » Sat Aug 30, 2014 7:25 pm

The issue has been identified and corrected.

There was a missing call to free some memory resources following the host ip address lookup function.

We will be posting an update to resolve this shortly.

Thanks to Dave444 and DennisD for their helpful identification of the issue!
Brooks
HydroFLASH Support
Support
 
Posts: 319
Joined: Sat Mar 02, 2013 4:46 pm
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: Both
Insteon Devices: Yes

Re: Firmware 3.0.4 stops responding over ethernet after 24-4

Postby Support » Sun Aug 31, 2014 4:32 pm

Version 3.00.10 Has been released to address this issue and a couple of others. See release notes here:
viewtopic.php?f=10&t=266
Brooks
HydroFLASH Support
Support
 
Posts: 319
Joined: Sat Mar 02, 2013 4:46 pm
HydroFLASH Type: HydroFLASH WiFi Version
Mobile App Type: Both
Insteon Devices: Yes

Previous

Return to Bug Reports

Who is online

Users browsing this forum: No registered users and 1 guest

cron