Rain Sensor - Detection

[chadm]

The log file appropriately indicates that the rain sensor event has been detected:


************* New Logging File Started *************
HydroFLASH Software - Wired Version 3.00.07, 08-16-2014
Copyright (C) Premier Digital Communications, Inc. 2005-2014
Web Address http://www.HydroFLASH.net - All Rights Reserved
HydroFLASH IP Address 10.11.12.8 - HydroFLASH UID 135639
System Up Time 15 seconds

Sun 08-17-2014 10:28:45 - Real Time Clock Test Passed
Sun 08-17-2014 10:28:45 - SNTP Primary Host Name Lookup Successful -- IP Address 128.138.141.172
Sun 08-17-2014 10:28:45 - SNTP Secondary Host Name Lookup Successful -- IP Address 50.22.155.163
Sun 08-17-2014 10:28:45 - SNTP Server Started successfully - Interval set to 24 Hours
Sun 08-17-2014 10:28:45 - System will download Weather Data 21 minutes past top of hour.
Sun 08-17-2014 10:28:45 - Start up complete. Entering main loop.....
Sun 08-17-2014 10:28:50 - Rain Sensor Event - Rain Delay Time Active - All running programs canceled


...however, the WUI and iPhone app does not indicate this:


Sunday August 17, 2014 01:08 PM
Sunrise 06:52 AM - Sunset 08:11 PM

* System Normal *

No Watering Stations are Currently Active


The rain sensor delay interval is set to 1hr:


Rain Sensor Rain Delay Time Hours (1-99 Hrs): 1

[Support]

What iPhone app version are you using?

[chadm]

iPhone app version is listed as 3.0 in About.

[Support]

So it looks like you are using the correct iPhone Version and the latest firmware.

I have set the Rain Sensor Rain Delay to 1 Hour and shorted the input to trigger a rain event. Al looks correct on the iPhone app indicating a Rain Delay Active - 1 Hour remaining in red.

I repeated the test with the rain sensor active at power up with the same results.

Can you provide additional information as to how to repeat the issue here?

The fastest way to solve technical issues is to contact support via email with a good contact number so we can contact you directly - It is much more efficient to exchange details and resolve issues.

Yes we routinely support customers on weekends.

Thanks,

[Support]

This issue was confirmed today and the correction for it has been posted in Version 3.00.09 available for automatic download via the "Update from Cloud Server" button or via traditional download and install.

Rain / Watering delays were not being activated unless the "Enable Watering Delay Push Notifications" was selected (checked) on the System Settings page.

Thanks Chad for your help!

[chadm]

Thank you very much for the swift code patch Brooks.